Author Archives: Halliburton


About Halliburton

Founded in 1919, Halliburton is one of the world's largest providers of products and services to the energy industry. With approximately 55,000 employees, representing 140 nationalities in more than 80 countries, the company helps its customers maximize value throughout the lifecycle of the reservoir – from locating hydrocarbons and managing geological data, to drilling and formation evaluation, well construction and completion, and optimizing production throughout the life of the asset.

Tech Paper: Continuous Use of Fiber Optics-Enabled Coiled Tubing Used to Accelerate the Optimization of Completions Aimed at Improved Recovery and Reduced Cost of Development

Halliburton Helps Operator Increase Production by up to 25% with Fiber Optics-Enabled Coiled Tubing Continuous improvement in completions designs leading to an increased return on asset development is one of the primary focuses of operating companies. To continue driving towards this goal, an operator looked to continuously optimize completions designs in their acreage in Bakken, North Dakota. There were two parallel paths taken...

Case Study: Advanced Completion Solutions for Multizone Water Injection in Soft Sand

World’s First 10,000-psi Triple-zone Intelligent Completion For Water Injection Challenges – A major operator in the Caspian region required pressure support and sweep efficiency for enhanced recovery of a massive offshore oil field. Previous attempts at multizone, high-rate water injection in this soft sand field had mixed results with non-conformance injection profiles and loss of sand screen integrity, leading to sand infill and...

Inflow Tech® Packer Enables Operator to Identify Liner-top Leaks in Long and Complex Big-Bore ERD Well

Packer Performs Successfully in Single Trip, Saving Operator Millions of Dollars in Blowout Avoidance Challenge – This was the longest well that the operator had drilled in the region and the most complex in terms of architecture. The well construction consisted of 12,831 feet (3,911 meters) of mixed 13 5/8-in. and 13 3/8-in. casing, as well as 13,330 feet (4,063 meters) of 9...

Halliburton Installs 300th FlexRite® System, Including Over 100 FlexRite MIC Junctions, In North Sea

FlexRite MIC Junctions Enable More Advanced Multilateral Completions Challenge – Back in 2012, the operator required a solution for achieving new levels of zonal control in its multilateral wells. Traditionally, many multilateral wells have consisted of multiple branches commingled in a completion solution that provides greatly increased reservoir exposure, but with limitations on control over individual branches and zones. A new completion solution...

Don’t Get Stuck On Defense: Learn How Some Operators Are on the Offensive against Frac Hits

With many unconventional basins shifting from exploration and leases to infill drilling, a topic of major concern is now “well bashing” — when frac fluid of an infill child well infiltrates the wellbore of a nearby parent well. Over the past few years we’ve seen parent-well production decrease, requiring costly workover operations to regain production targets. This well basing problem is compounded when...

Tech Paper: Unconventional Multiplay Evaluation of Casing-in-Casing Refracturing Treatments

Halliburton successfully implements casing-in-casing refracturing treatments in the Haynesville and Eagle Ford Shale Throughout the development of major shale plays, a better understanding of stimulation influence on reservoir productivity has led to significant changes in industry completion practices. The relatively fast development of fields combined with the evolution of completion design suggests the completions performed on the earlier completed wells are understimulated and...

Case Study: Single-Trip Multizone Cased-hole Frac Packs and Intelligent Completions Improve Recovery in Subsea Gas Field

Advanced completion solution enables wells to remain fully functional after five years of production Challenge – The operator needed to improve operational efficiencies for this complex subsea field of shallow, low pressure, and weakly consolidated gas reservoirs. The field required a method of dealing with unconsolidated sands, along with the ability to monitor and control each of the six potential layers as the...

Case Study: Integration Drives Performance and Accelerates Learning Curve in an Ultra-Deepwater Pre-Salt Exploration Drilling Project in Brazil

Halliburton integrated services achieves new benchmarks in post-salt and salt sections Challenge – The operator faced many challenges to build exploratory wells in this ultra-deepwater environment, with the main objectives to minimize the significant drilling risks and costs and reduce the total cost of well construction and evaluation. Other challenges included the long 28-inch riserless section in the post-salt formations facing hole instability...

Case Study: eRED® Valve Provides Efficiencies and Time Savings in Downhole Operations

Valve operates remotely after 23 months down hole Challenge – The operator’s previous method for hanger installation and completion testing involved the deployment of a dual-bore riser and multiple intervention runs to allow for plug installation on the annulus bore. This can be a time-consuming operation, especially as the North Sea is subject to adverse weather conditions that can result in waiting on...

Case Study: eRED® Valves Save 88 Hours of Rig Time for Upper Completion Project

Remotely operated valves eliminate requirement of costly interventions To achieve its goals, Shell elected to pre-install the remotely operated Halliburton eRED® valve as a shallow barrier in the tubing hanger. This allowed Shell to have a secondary barrier in place without the requirement of an intervention before removing the blowout preventer (BOP) and installing the Christmas tree. In total, the eRED valves were...


Sign up to receive each new post via email.

Delivered by FeedBurner

About this Blog

The Halliburton Solutions Blog will give you more insight into some of today’s most complex challenges in deep water, unconventional resources and mature fields. This is a forum to exchange information, ideas and solutions to help you overcome these challenges. If there’s a particular topic you’d like to know more about, please let us know at Thank you for joining us.

Blog Guidelines

To ensure that this site is informative and safe for all users, Halliburton has implemented the following House Rules:

• We reserve the right to correct statements that are inaccurate.

• We reserve the right to delete any content that is abusive, defamatory, or obscene.

• While we encourage open dialogue, we reserve the right to delete comments at our discretion.

Please read the Privacy Statement before accessing and using this Site.